TRENDnet TC-NT2, TRENDnet Network Cable Tester manual BNC Cable For Ethernet Network Only

ENGLISH

BNC Cable (For Ethernet Network Only)

1.Connect one RJ-45 to BNC connector to the remote port on the TC-NT2 transmitter. Connect the other RJ-45 to BNC connector to the loopback port on the TC-NT2 remote terminator.

2.Connect one end of a BNC cable to the TC-NT2 remote transmitter. Connect the other end of the BNC cable to the TC-NT2 transmitter.

3.Push the power button on the TC-NT2 transmitter to the “On” position.

4.Press the auto (automatic) or test (manual) button.

2

11

TEST
	POWER / TONE
AUTO	OFF / ON	3
4	TC-NT2
	TRANSMITTER

TC-NT2

REMOTE

TERMINATOR

3