TRENDnet TC-NT2, TRENDnet Network Cable Tester manual Install the battery, RJ-11/RJ-45 Cable Test

ENGLISH

Install the battery

1.Slide the cover off the TC-NT2 transmitter.

2.Connect and insert the battery.

3.Slide the cover back on to the TC-NT2 transmitter.

RJ-11/RJ-45 Cable Test

1.Connect one end of an RJ-11 or RJ-45 cable to the remote port on the TC-NT2 transmitter. Connect the other end of the RJ-11 / RJ-45 cable to the loopback port on the TC-NT2 transmitter.

2.Switch the power button to the “On” position.

3.Press the auto (automatic) or test (manual) button.

1

	TEST
3		POWER / TONE	2
	AUTO	OFF / ON

TC-NT2

TRANSMITTER

1