Dell GX240 manual Small Desktop and Small Mini-TowerComputers, 1 2 3, Installing Upgrades

8Enter system setup and update the appropriate Diskette Drive A option to reflect the size and capacity of your new floppy drive.

9Verify that your computer works correctly by running the Dell Diagnostics.

Small Desktop and Small Mini-Tower Computers

1If the replacement drive does not have the bracket rails attached, remove the rails from the old drive by removing the two screws that secure each rail to the drive. Attach the bracket to the new drive by aligning the screw holes on the drive with the screw holes on the bracket rails and tightening all four screws (two screws on each rail).

F l o p p y D r i v e B r a c ke t Ra i l s

1

2

3

1drive

2bracket rails (2)

3screws (4)

2Gently slide the drive into place until the tabs securely click into position.

3Attach the power and data cables to the floppy drive, and connect the other end of the data cable to the connector labeled “DSKT” on the system board.

Installing Upgrades

125