Dell GX240 manual Jumper Settings

Jumper Settings

The following figure shows the jumpers on the system board.

S y s t e m B o a r d J u m pe r s

NOTICE: Make sure that your computer is turned off and unplugged before you change the jumper settings. Otherwise, damage to your computer or unpredictable results may occur.

To change a jumper setting, pull the plug off its pin(s) and carefully fit it down onto the pin(s) indicated.

S y s t e m - B o a r d J u m p e r S e t t i n g s

Jumper	Setting	Description
PSWD	(default)	Password features are enabled.
		Password features are disabled.
RTCRST		Real-time clock reset. Can be used for
		troubleshooting purposes.

jumpered

unjumpered

Advanced Features

59