Dell GX240 manual Using the Dell OptiPlex ResourceCD

S o l v i n g P r o b l e m s

Hardware devices conflict	See “Hardware Conflicts”
Computer memory amount is not	See “Computer Memory Problems”
correct
System board malfunctions	See “System Board Problems”
System board is damaged	See “Resetting a Damaged System
	Board”
An error message	See “Messages and Codes”
A series of beeps on computer startup	See “Messages and Codes”

Using the Dell OptiPlex ResourceCD

To use the Dell OptiPlex ResourceCD while you are running the Microsoft® Windows® operating system, perform the following steps:

1Insert the Dell OptiPlex ResourceCD into the CD drive.

If you are using the Dell OptiPlex ResourceCD for the first time on this computer, the ResourceCD Installation window opens to inform you that the ResourceCD is about to begin installation.

2Click OK to continue.

To complete the installation, respond to the prompts offered by the installation program.

3Click Next at the Welcome Dell System Owner screen.

4Choose the appropriate System Model, Operating System, Device Type, and Topic.

To access the Dell OptiPlex ResourceCD Guide, click User’s Guides in the Topic pull-down menu and click Dell OptiPlex ResourceCD.

Drivers for Your Computer

To display a list of device drivers for your computer using the Dell OptiPlex ResourceCD, perform the following steps:

1Click My Drivers in the Topic pull-down menu.

The ResourceCD scans your computer’s hardware and operating system, and then a list of device drivers for your system configuration is displayed on the screen.

NOTE: To access device drivers and user documentation, you must use the ResourceCD while you are running Windows.

Solving Problems

157