Replacing Fan Trays ERX Edge Routers
Installing the Fan Tray
Caution: Do not use the fan tray handle to carry the fan tray assembly. Use the handle only to push the into the chassis.
To install the fan tray:
1Hold the tray vertically so that the captive screws point towards you and you can read text on the labels.
2Place the bottom corners of the tray housing in the plastic shelf guides of the fan tray compartment; push toward the back of the chassis halfway, and stop.
3Push the fan tray toward the back of the shelf until it stops.
There is an electrical connector on the back of the fan tray that pairs with an electrical connector at the back of the shelf.
4With a Philips screwdriver, tighten the captive screws on the fan tray.
Alternate between screws when tightening them to ensure that the electrical connectors at the back of the tray fit tightly.
