Juniper Networks ERX-1410, ERX-1440, ERX-705 Unpacking the ERX-700 Series, 3Removing an L-bracket

2-4

CHAPTER 2

Installing the ERX System

L-brackets

Hex bolts

Shipping skid

Figure 2-3Removing an L-bracket

8Depending on where you want to position the system, proceed to Freestanding Installation or Rack-Mounted Installation, later in this chapter.

Unpacking the ERX-700 Series

The ERX-700 series come boxed but not attached to a skid.

For your convenience, we recommend that you unpack the ERX system in the location where you want to install it.

To unpack the ERX-700series:

1Open the carton from the top.

2Remove the box of accessories that sits on top of the system.

3Before you remove the unit from its carton, proceed to Freestanding Installation or Rack-Mounted Installation, later in this chapter.