Juniper Networks ERX-705, ERX-1410, ERX-1440, ERX-700 manual Active

Understanding Status LEDs ERX Edge Routers

8-5

Table 8-2LED identification and activity descriptions (continued)

LED Location	LED Label	LED Indicator	LED Color	OFF to ON	ON to OFF
	ACTIVE	Port status	Green	Port configured	Port not configured
X.21/V.35 line
	LOOPBK	Port status	Yellow	Port in local loopback or	Port not in loopback
module				remote loopback,
				depending on the type of
				connection. (See)
	ERROR	Port status	Red	Port is enabled or comes	Port is disabled or goes
				online	offline
	V.35	Port status	Green	V.35 cable connected	V.35 cable disconnected
	X.21	Port status	Green	X.21 cable connected	X.21 cable disconnected
	DCE	Port status	Green	DCE cable connected	DCE cable disconnected
	DTE	Port status	Green	DTE cable connected	DTE cable disconnected
	SYNC	Port status	Green	In frame	Not in frame
Other line
	YEL ALM	Port status	Yellow	Far end receive failure	No FERF present
modules				(FERF) exists
	RED ALM	Port status	Red	Loss of sync/frame	In frame

The following figures show a representative module for each of the three variations:

•SRP module (Figure 8-1)

•Ethernet line module (Figure 8-2)

•Other line modules (Figure 8-3)