Juniper Networks ERX-1410, ERX-1440, ERX-700, ERX-705 - page 24

CHAPTER 1
ERX System Overview
1-4
Figure 1-2 ERX-1400 series rear view
ERX-700 Series
In the ERX documentation, the term ERX-700 series refers to both the
ERX-705 system and the ERX-700 system. The terms ERX-705 system
and ERX-700 system refer to the specific models.
The ERX-705 system is a compact, high-performance model that
manages low traffic density and uses a 5-Gbps SRP module, the
SRP-5G+ module. The ERX-700 system is a robust, high-density system
with less capacity than the ERX-1400 series. The ERX-700 system uses
either the SRP-10G module or a 5-Gbps SRP module, the SRP-5G
module. (Although the SRP-5G+ module obsoletes the SRP-5G module;
the software continues to support both modules.)
You can configure the ERX-700 series to enable the line modules either
to operate at full line rate performance or to operate at a rate dependent
on the resources available. For information about configuring
performance of line modules, see ERX System Basics Configuration
Guide, Chapter 5, Managing Line Modules and SRP Modules.
Fan assembly
Plenum
Power switches
OC3 I/O module
(slot 13)
SRP I/O module
Power input module
CT3 I/O module
(slot 0)