About This Guide

This ERX Installation and User Guide provides the information you need to install and start the ERX edge router.

Note: If the information in the ERX Release Notes differs from the information in this guide, follow the ERX Release Notes.

Your ERX system is shipped with the latest system software installed. If you need to install a future release or reinstall the system software, refer to the procedures in Appendix E, Installing ERX System Software.

ERX Edge Routers

Four models of the ERX edge router are available:

ERX-1440 system

ERX-1410 system

ERX-705 system

ERX-700 system

All models use the same software. For information about the differences between the models, see Chapter 1, ERX System Overview.

In the ERX documentation, the term ERX-1400 series refers to both the ERX-1440 system and the ERX-1410 system. Similarly, the term ERX-700 series refers to both the ERX-705 system and the ERX-700 system. The terms ERX-1440 system, ERX-1410 system, ERX-705 system, and ERX-700 system refer to the specific models.

Page 15
Image 15
Juniper Networks ERX-705, ERX-1410, ERX-1440, ERX-700 manual About This Guide, ERX Edge Routers