Juniper Networks ERX-705, ERX-1410, ERX-1440, ERX-700 manual Ipsec

Connection Information ERX Edge Routers

B-13

Table B-3Connection information for module assemblies (continued)

Assembly	Line
Name and	Module	I/O Module	No. of
Capability	Label	Label	Ports	Connector Type	Cabling Specifications

GE	GE/FE	GE	1 active	SC full duplex
single modeb		I/O	1 redundant
		SINGLE
		MODE

•Tx power

›min: –11 dBm

›max: –3 dBm

•Center wavelength: 1300 nm

•Rx input power

›min: –20 dBm

›max: –3 dBm

•Rated for 550 m (601 yards) over 62.5-micron core or 50-micron core MM fiber

•Rated for 5 km (3.1 miles) over 10-micron core cable

HSSI	HSSI-3F	HSSI-3	3	Standard HSSI	•	50 feet (15.24 m) maximum
				connector: 2-row,		cable length
				50-pin, receptacle
				header with rails and
				latch blocks
IPSec Service	IPSEC	No I/O	N/A	N/A	N/A
	SERVICE	module
OC3 (dual	OC3	OC3	2	SC full duplex	•	Tx power:
port)		I/O				›	min: –19 dBm
multimode		MULTI				›	max: –14 dBm
		MODE			• Center wavelength: 1310 nm
					•	Rx input power:
						›	min: –30 dBm
						›	max: –14 dBm
					• Rated for 2 km (1.2 miles)
						over 62.5-micron core cable
						with an optical loss of 0–9 dB
						or 50-micron core cable with
						an optical loss of 7 dB
OC3 (dual	OC3	OC3	2	SC full duplex	•	Tx power:
port)		I/O				›	min: –15 dBm
single mode		SINGLE				›	max: –8 dBm
		MODE			• Center wavelength: 1310 nm
					•	Rx input power:
						›	min: –31 dBm
						›	max: –8 dBm
					• Rated for 15 km (9.3 miles) of
						9-micron core cable