CHAPTER 2
Installing the ERX System
2-8
To install the system in the rack:
1On the rack, identify and mark the holes that you want to use for
mounting the system.
2One person should stand on the left side of the system, and another
should stand on the right side.
3Grasp the lower back of the unit with one hand and the lower front
of the unit (see Figure 2-4) with the other hand.
4Bend your knees and carefully lift the unit into position in the rack.
5With the help of the third person, align the holes in the system’s
flanges with the holes in the rack, and hold the system in position.
6Starting at the bottom, the third person should screw the flange on
each side of the system into the four holes on each side of the rack.
7Connect the necessary cables (see Chapter 4, Cabling the ERX
System, for instructions on installing the cables).
Figure 2-6 illustrates a distribution rack with one ERX-1410 system and
two ERX-700 systems installed.