Juniper Networks ERX-1440, ERX-1410, ERX-700, ERX-705 manual Connection Information, Full

Connection Information ERX Edge Routers

B-7

Connection Information

Table B-3shows the names of the line modules and I/O modules that you can combine to form the different module assemblies. This table also provides cabling specifications for the I/O modules.

Table B-3Connection information for module assemblies

Assembly	Line
Name and	Module	I/O Module	No. of
Capability	Label	Label	Ports	Connector Type		Cabling Specifications
CE1	CE1	CE1	20	•	RJ-48C,120 ohm	•	Use shielded cables to
		FULL		•	BNC, 75 ohm		maintain EMC compliance.
		I/O
					via a balun panel	•	The transmitted signal
					that connects to		complies with ITUT G.703:
					the I/O module		Physical/electrical
							characteristics of hierarchical
							digital interfaces (November
							2001) for cable lengths up to
							450 m (492 yards).
cOC3/STM1	cOCx/STMx	cOC3	4	SC full duplex		•	Tx power:
multimode	F0	STM1					›	min: –19 dBm
		F0 I/O					›	max: –14 dBm
		MULTI
						• Center wavelength: 1310 nm
		MODE
						•	Rx input power:
							›	min: –30 dBm
							›	max: –14 dBm
						• Rated for 2 km (1.2 miles)
							over 62.5-micron core cable
							with an optical loss of 0–9 dB
							or 50-micron core cable with
							an optical loss of 7 dB
cOC3/STM1	cOCx/STMx	cOC3	4	SC full duplex		•	Tx power:
single mode	F0	STM1					›	min: –15 dBm
intermediate		F0 I/O					›	max: –8 dBm
reach		SINGLE
						• Center wavelength: 1310 nm
		MODE
						•	Rx input power:
							›	min: –31 dBm
							›	max: –8 dBm
						• Rated for 15 km (9.3 miles) of
							9-micron core cable