Juniper Networks ERX-1440, ERX-1410, ERX-700, ERX-705 manual Class 1 LED Product

Cabling I/O Modules ERX Edge Routers

4-13

Cabling LC Duplex Connectors

In accordance with EN60825-1, Safety of Laser Products - Part 1:

Equipment Class, Requirements, and User’s Guide (2001), multimode

I/O modules with LC connectors are defined as follows:

CLASS 1 LED PRODUCT.

In accordance with EN60825-1, Safety of Laser Products - Part 1:

Equipment Class, Requirements, and User’s Guide (2001), single-mode

I/O modules with LC connectors are defined as follows:

CLASS 1 LASER PRODUCT.

To cable I/O modules with LC duplex connectors:

Warning: Do not look directly into LC-style fiber connectors. The fiber-optic laser used in single-mode fiber (SMF) meets the regulatory requirements for casual exposure to the eye; however, looking directly into a laser can cause eye damage.

Warning: IEC 825, Class 1 laser fiber connectors are for connection only to Class 1 laser devices.

1Insert the TX male fiber connector into the selected port.

2Terminate the other end in the appropriate network connection.

3Repeat steps 1 and 2 for the RX fiber connector.

4Repeat steps 1–3 for the remaining ports.