Manuals / TRENDnet / Computer Equipment / Server

TRENDnet TE100-P1P manual About This Guide

Models: TE100-P1P

1 63

Download 63 pages 23.95 Kb

Page 4

ABOUT THIS GUIDE

This manual provides instructions and illustrations on how to use your 10/100Mbps Parallel Print Server, including:

zChapter 1, Introduction, provides the general information on the product.

zChapter 2, Hardware Installation, describes the hardware installation procedure for the product.

zChapter 3, Using the Utilities, helps you to install and use the software.

zChapter 4, Web Configuration, completes the configuration using the web browser.

zChapter 5, Printing in Windows XP, lets you complete printing task through your print server in Windows XP environment.

zChapter 6, Printing in MAC OS, lets you complete printing task through your print server in MAC OS environment.

Please note that the illustrations or setting values in this manual are FOR YOUR REFERENCE ONLY. The actual settings and values depend on your system and network. If you are not sure about the respective information, please ask your net work administrator or MIS staff for help.

- 3 -

Image 4

TRENDnet TE100-P1P manual About This Guide

Contents

Page TABLE OF CONTENTS HARDWARE INSTALLATIONUSING THE UTILITIES Installing PS-UtilityA DDING LPR P RINTER P ORTS P RINTING FROM W INDOWS 95/98/M ES ETTING TCP/IP P RINTING S ETTINGS PRINTING IN WINDOWS 2000/XPABOUT THIS GUIDE INTRODUCTION Package Contents System RequirementsGeneral Features Product View LAN Connector - plug your LAN cable to this connectorPower Connector - plug the AC Power Adapter to this jack Front ViewThere are three green LED indicators on the rear panel PowerSteady light confirms that the Print Server is powered When it is blinking, the printer connected is printingHARDWARE INSTALLATION Networking ApplicationThe following diagram explains the application of your print server Network Print Server SolutionInstalling the Print Server USING THE UTILITIES Auto-Run Installation Installing PS-Utility PS-UtilityUsing PS-Utility Start\Programs\PS-UtilityComponent Features Control ButtonsClose Click this button to exit PS-Utility PS Wizard 3. Select one printer port in the Print Server List, and click Next Choose one connected printer portChoose one connected printer within the network Your print server name Your printer port name4. The configuration is completed, click Reboot and then Yes to restart the system WEB CONFIGURATION Web Configuration UtilityHome The Management Screen of the Configuration UtilitySetup Wizard SystemIP Address Microsoft Network Second HTTP Port Save to Print Server The Setup Wizard has been completedChange IP Address Printer Information Factory Reset Please click Yes to restore the factory default settingFirmware Upgrade About This screen displays the information of the print server95/98/ME PRINTING IN WINDOWSInstalling the LPR for TCP/IP Printing Client 8. Select the LPR for TCP/IP Printing client and click OK Adding LPR Printer Ports 6. Click OK to leave the LPR for TCP/IP Printing Properties window Printing from Windows 95/98/Me Page Page Setting TCP/IP Printing Settings The parameters are as follows Setting Up Windows 2000 TCP/IP Printing Click Start Settings Printers2000/XP PRINTING IN WINDOWSCreate a new “Standard TCP/IP Port” Click “Next”Select “Custom”, and click “Settings” Click “Next” Click “Finish” Click “Next” Select a “Printer Name”Sharing can be enabled here Also, a Test Page can be printed to confirm proper configurationPage Click Start Printer and Faxes Setting Up Windows XP TCP/IP PrintingDouble Click “Add a Printer” Click “Next” Select “Local Printer” Create a new “Standard TCP/IP Port” Click “Next” Select “Custom”, and click “Settings” Click “Next” Click “Finish” Click “Next” Select a “Printer Name” A Test Page can be printed to confirm proper configuration PRINTING IN MAC OS Rendezvous Uses in MAC OS2. Select Rendezvous from the pop-up menu 5. The printer is installed into the system successfully Limited Warranty TE100-P1P - 5 Years Warranty