Authentication Type: The authentication type default is set to open system. There
are five options: Open System; Shared Key; WPA;
WEP: Enable or Disabled.
Mode: Select the level of encryption you want from the
WEP Key: Select WEP Key - 64 or 128 bits from the
Key 1 ~ Key 4: Enables you to create an encryption scheme for Wireless LAN transmissions. Manually enter a set of values for each key. Select which key you want to use by clicking the radio button next to the key. Click Clear to erase key values.
If WPA or 802.1X is selected, the below screen is shown. Please set the length of the encryption key and the parameters for the RADIUS server.
Lifetime: Select the Lifetime of the Encryption Key from 5 Minutes to 1 Day. As soon as the lifetime of the Encryption Key is over, the Encryption Key will be renewed by the Radius server.
Encryption Key: Select the Encryption Key Length Size ranging from 64 to 128 Bits that you would like to use.
RADIUS Server:
1.Enter the IP address of and the Port used by the Primary Radius Server Enter the Shared Secret, which is used by the Radius Server.
2.Enter the IP address of, Port and Shared Secret used by the Secondary Radius Server.
Note: As soon as 802.1X security is enabled, all the wireless client stations that are connected to the Router currently will be disconnected. The wireless clients must be configured manually to authenticate themselves with the Radius server to be reconnected.
If
19
