TRENDnet 108Mbps 802.11g Wireless Firewall Router, TEW-452BRP - page 29

26
Update: Select one of the entries in the static IP address table at the bottom of the page
and, after changing parameters, click Update to confirm the changes.
Delete: Select one of the entries in the static IP address table at the bottom of the page
and click Delete to remove the entry.
New: Click New to clear the text boxes and add required information to create a new
entry.
3.4.2 Dynamic
This screen enables you to set NAT parameters.
NAT: Click the radio buttons to enable or disable NAT.
Transmit: Click the radio buttons to set the desired transmit parameters, disabled, RIP
1, or RIP 2.
Receive: Click the radio buttons to set the desired transmit parameters, disabled, RIP 1,
or RIP 2