TRENDnet Net Spot Wireless Access Point manual Prepare for Installation, Verify Package Contents

English QIG

1. Prepare for Installation

Thank you for purchasing TRENDnet's TEW-453APB Hot Spot Wireless Access Point.

This guide will help you set-up your Access Point quickly and easily. Just follow the step-by-step instructions below, and enjoy the benefits of accessing the Internet without ever being tied down to wires! If you run into problems, please refer to the Troubleshooting section. If you need further technical support, please visit www.TRENDNET.com or call technical support by phone.

Verify Package Contents

Please make sure you have everything in the box:

TEW-453APB

CD-ROM

TEW-453APB

TRENDnet

Quick Installation Guide

Power Adapter

(24V DC, 500mA)

Verify Equipment

Before setting up the Access Point, you should have the following:

1.A computer with Wired (RJ45) or Wireless network card.

2.TCP/IP protocol installed on the Computer.

3.A web browser such as Internet Explorer (5.0 or higher) or Netscape Navigator (4.7 or higher).

4.A Hub or Switch connecting your existing wired network.

5.An RJ-45 Network Cable for connecting the Access Point to your network switch.

1 English