Manuals / TRENDnet / Computer Equipment / Webcam

TRENDnet TEW-453APB, Net Spot Wireless Access Point manual Click OK, Click Apply/Restart, English

Models: TEW-453APB

1 14

Download 14 pages 41.38 Kb

Page 12

4.Click OK.

3.Select your country from the pull down menu, click Fixed IP Address, and type in your IP address, Subnet Mask, Gateway, and DNS to match your current network settings. Click Save.

4.Click OK.

5. Click Apply/Restart.

6.The TEW-453APB is now ready for your Wireless Network.

10

English

Image 12

TRENDnet manual Click OK, Click Apply/Restart, The TEW-453APB is now ready for your Wireless Network, English

Contents

Hot Spot Wireless Access Point Quick Installation Guide Point daccès sans fil sensible Guide dinstallation rapideDrahtloser Access Point für Hotspots Kurzanleitung zur Installation TEW-453APBTable of Contents Prepare for InstallationInstall Hardware Configure TCP/IP Settings1. Prepare for Installation Verify Package ContentsVerify Equipment English2. Install Hardware Verify Hardware InstallationEnglish 3. Configure TCP/IP Settings Windows 98SE/MEEnglish 6. Click OK EnglishNOTE If this message does not appear, restart your computer manually EnglishWindows 2000/XP 1. Find the Start button located on the Desktop3. Double-Click the Network Connection Icon English5. Under the General tab, locate and click Internet Protocol TCP/IP and then click Properties. The Internet Protocol TCP/IP Properties box will appear English8. Your computer is ready to access and configure the Access Point 7. Click OKEnglish 4. Configure the Access Point From a Wired ComputerEnglish 6. The TEW-453APB is now ready for your Wireless Network 4. Click OK5. Click Apply/Restart EnglishTroubleshooting Product Warranty@Registration TRENDnetWhats Next in Networking TRENDware, USA