Step 9: Installing Deluxe Wireless Wall Station (if included)
Install all wall controls out of the reach of children and in a location where the door can be seen before activating. Do not mount push buttons near or next to garage door.
Locate a convenient place to mount wall station. To keep wall station out of the reach of children, measure at least five feet up from the floor and secure wall station base into wood wall framing using (2) Phillips head screws. Pilot drill mounting holes using a 3/32" bit. Use 2 of 3 holes that best align with wood framing.
CAUTION: Over tightening the screws could deform plastic base and interfere with circuit board snaps.
NOTE: Insert bottom of circuit board behind bottom snap of wall sta- tion base. Pivot circuit board up until board snaps into place. For best results, press on circuit board between battery terminals.
Insert battery onto circuit board being careful to match (+) positive battery marking with (+) circuit board marking. Align wall station cover/button assembly with base. Press cover assembly over base until cover snaps into place. A uniform seam between the cover and base indicates a proper installation.
Step 10: Install Entrapment Warning Label
Install Entrapment Warning Label next to wall station in a prominent location
Install Entrapment Warning Label next to Wall Station as illustrated. If label adhesive will not adhere to the sur- face, secure the label by additional mechanical means such as staples, nails or screws.
9
