6. Click Next and setup program will display the summary of your | Diagnostic | |
printer’s configuration. | If you don’t have an Access Point in your network or the print server | |
| cannot be discovered in Infrastructure Mode, please refer to the | |
| following steps | |
| 1. | Switch the Print Server’s DIP switch to DIAG mode. |
| 2. | Check on the Computer’s and see if TCP/IP protocol (for the wireless |
|
| adapter) is installed and an IP address assigned to the wireless adapter. |
|
| For example: IP address: 192.168.1.100, subnet: 255.255.255.0. |
| 3. | Run the utility of your wireless adapter and set it to |
|
| mode. |
| 4. | Set the wireless adapter’s SSID to |
|
| disable WEP. |
| 5. | Run the Wireless Setup Wizard and refer to the Software Installation |
|
| step 2 ~ 14 (page 3) to configure your wireless printer to meet your |
|
| wireless network environment. |
| 6. | Switch the DIP back to Normal mode and adjust your wireless adapter |
|
| configuration. |
| 7. | Run Network Print Server Wizard and refer to the Printer Installation |
7. Click Finish to complete the printer installation |
| step 1 to 7. |
| 8. | Done. |
| Technical Support |
| You can find the most recent software and user documentation on the |
| TRENDware website. TRENDware provides free technical support for all |
| customers for the duration of the warranty period on this product. |
| TRENDware Technical Support (USA) |
| Tel: |
| Fax: |
| |
| www.trendware.com |
| Support Hours: 7:30AM ~ 6:00PM, |
| Monday ~ Friday (except holidays) |
|
|
Page 13 | Page 14 |
