TRENDnet TEW623PI manual Software Installation, Windows Utility and Driver Installation

SOFTWARE INSTALLATION

This section describes how to install the driver and utility for the 300Mbps Wireless N PCI Adapter.

Note: DO NOT install the 300Mbps 802.11g Wireless LAN Adapter in the computer until instructed to do so.

Windows Utility and Driver Installation

1) Insert the CD-ROM into your CD-ROM drive, the Autorun will appear.

2)Click “Install Utility & Driver” icon to install the driver and software and the install wizard will begin installing the software. Follow the install wizard instructions to complete the installation.

3)Follow the Install Shield Wizard Instructions. Click “Next” to continue and finish it.

4)Once the utility is installed, turn off the PC, open the cover and install the TEW-623PI adapter to the available PCI slot. Attach the antennas, close the cover and boot up the PC again. The windows will detect new hardware and install the appropriate driver automatically.

4