UNPACKING AND SETUP
This section provides unpacking and setup information for the 300Mbps 802.11n Wireless LAN Adapter.
Unpacking
The box should contain the following items:
If any item is found missing or damaged, please contact your local reseller for replacement.
Setup
Before installation, check the following:
zMake sure your computer is running at least a 300MHz or above processor with 256MB RAM or above
zVisually inspect the CardBus/PCI Adapter and make sure that it is fully plugged in to the CardBus/PCI slot.
zThe operating system on your computer must be the following: Windows 7. Vista, XP (Service Pack 2) or 2000 (Service Pack 4)
zA 802.11n or 802.11b/g access point or router.
zMake sure the environment has minimal interference and obstructions.
2
