TRENDnet 4-Port Powerline 500 AV Adapter, TPL-4052E TPL-4052E Users Guide Installing Your Powerline Adapter, Adding adapters to your network

TPL-4052E User’s Guide Installing Your Powerline Adapter

Adding adapters to your network

Once you have installed and connected the rst Powerline Adapter

to your router, you can easily extend your network to other rooms by

adding addional Powerline Adapters.

To extend your network using an addional Powerline Adapter:

1. First, make sure the rst Powerline Adapter is installed and

connected to your router�

Note: This will allow devices connected to your powerline network to

access the Internet and other devices connected to your network. See

“Connecng a Powerline Adapter to your router” on page 5.

2. Plug in the addional Powerline Adapter to an available wall power

outlet in another room near a computer or network device (e.g. game

consoles, network-enabled TVs, network aached storage, network

media server/players, etc.) you want to connect to your network.

3. Connect one end of the included Ethernet cable to the Ethernet

port on your Powerline Adapter and then connect the other end to the

Ethernet port on your computers or another network enabled device.

4. Aer the addional Powerline Adapter is connected and installed to

your computer or network device, wait for the Powerline (PL) LED to

turn on. Aer the Powerline (PL) LED turns on, verify that the Power

(PWR) LED is on, the Powerline (PL) LED is on or blinking, and the

network LED is on or blinking.

Note: To verify that your Powerline Adapters are connected successfully

to your network, you can check if the computer(s) or network device(s)

can access the Internet through your powerline network.

To install addional Powerline Adapters in other rooms, repeat the

steps above for each adapter�