TRENDnet TPL307E2K manual Using the Utility, Click one of the Remote Devices in the list

4.2 Using the Utility

Double-click the desktop icon to open the Powerline Configuration Utility application.

Local

Device

The closest powerline adapter(s) that connects your computer to the electrical system.

Remote

Devices

Powerline
adapters that
are connected to
the selected
Local Device
across the	Rename	Enter the
electrical	the	Device
system.	selected	Password
	Remote	(DPW) for the
	Device	selected
		Remote
		Device

Privacy Tab

Change the

Network

Name/Security Key

Closes the

utility

application.

Add a	Scans for
Remote	Remote
Device that	Devices that
was not	were not
detected	detected

∙To apply changes to Remote Devices through the Powerline Configuration Utility, you must enter the Device Password (DPW) for each Remote Device located on the Device Label. The 16 character password should be all alphabetic characters with no numbers.

∙If you have not already done so, please write down the 16-digit Device Password (DPW) and corresponding MAC Address of each TPL-307E powerline adapter as this will be used to input into the utility. This is located on the Device Label, please refer to Section 1.4.

Enter the 16-digit Device Password (DPW) for each Remote Device in the utility

1.Click one of the Remote Devices in the list.

2.Click Enter Password.