TRENDnet TPL405E Color, Sequence, Definition, Button, Action, Function, Sync, Reset, TPL-405E

	TRENDnet User’s Guide								TPL-405E
	• Gigabit Ethernet Ports (1-4) - Connect an Ethernet cable (also called network
		cable) from your Powerline adapter Ethernet port and to your computer or
						LED	Color	Sequence	Definition
		network device.
	• Sync Button – Changes the default encryption key.					PWR	Green	Solid	Device powered on
						(Power)	N/A	Off	Device powered off
	• Reset Button – Resets the unit to factory defaults.							Solid	Powerline connected (Connection quality is
									Best)
							Green
									Syncing or Powerline data
	Button		Action	Function				Blinking	transmitting/receiving (Connection quality is
									Best)
				Initiate Sync/Connection and generate random
									Powerline connected (Connection quality is
				network name/key on first adapter (PWR LED will		PL		Solid
				start blinking).					Better)
						(Powerline)	Amber
	Sync			Match network name/key on secondary or additional				Blinking	Powerline data transmitting/receiving
			Push/hold for 2	adapter and connect to first adapter. (PWR LED will					(Connection quality is Better)
	(see Using
			seconds	start blinking)
	the Sync							Solid	Powerline connected (Connection quality is
	Button			Note: The secondary or additional Powerline					Good)
	Section for						Red
				adapter’s Sync button must also be pushed within 2
	use							Blinking	Powerline data transmitting/receiving
	instructions)			minutes (120 sec) of pushing the Sync button of the
									(Connection quality is Good)
				first adapter in order to establish connectivity.
							N/A	Off	Powerline is not synced or connected
			Push/hold for 15	Erases the network name/key
									10/20 Mbps , 100/200Mbps, 1000/2000Mbps
			seconds	(All LEDs will turn off and turn back on).		1-4		Solid
									(Half/Full Duplex) connected
				Reset device to factory defaults (All LEDs will turn off			Green
						(Gigabit
									10/20 Mbps , 100/200Mbps, 1000/2000Mbps
			Push/Hold for 1	and turn back on).				Blinking
	Reset					Ethernet
			second only	Note: Will reset to the factory default private					(Half/Full Duplex) data transmitting/receiving
						Connection)
				network name “HomePlug AV”.			N/A	Off	Port disconnected/no Ethernet link
	• Power Prong – Plugs into an available power outlet.				Note: The following factors may affect the Powerline network’s connection quality:
						• Noise – Generated by appliances which use your electrical system (e.g.
	• Diagnostic LEDs – Indicates the device status and connectivity.					Microwaves, ovens, blow dryer, iron, dishwasher, etc.). The quality of your
						household electrical wiring may also cause additional noise on your electrical
Note: Powerline (PL) LED color indicates the strength and quality of the Powerline						system.
						• Distance – Long lengths of electrical wiring through your electrical system
connection through the electrical system.
						between connected Powerline adapters.

© Copyright 2012 TRENDnet. All Rights Reserved.

3