TRENDnet User’s Guide
To change the default encryption key between two Powerline adapters:
1.Verify that all Powerline adapters are already installed and connected using the default encryption key, see “Installing your Powerline Adapters” on page 5.
2.On one of your connected Powerline adapters, push and hold the Sync button for 15 seconds and release it. All LEDs will turn off and turn back on. This will erase the current encryption key assigned to the first Powerline adapter.
Note: Once you complete this step, the other Powerline adapter will not be able to communicate to this Powerline adapter.
3.Push and hold the Sync button on the other Powerline adapter for 15 seconds and release it. All LEDs will turn off and turn back on. This will erase the current encryption key assigned to the second Powerline adapter.
4.Within 2 minutes, push and hold the Sync button on the first Powerline adapter for 2 seconds and release it. The Power (PWR) LED will start blinking. This will generate a random encryption key on the first Powerline adapter.
5.Push and hold the Sync button on the second Powerline adapter for 2 seconds and release it. The Power (PWR) LED will start blinking. This will create a connection between both Powerline adapters using the new encryption key. All LEDs will turn off and turn back on and the Powerline (PL) LED will turn on the when adapters are connected.
Add adapters using the Sync button
If you have changed the default encryption key assigned to your Powerline adapters, additional adapters will not automatically connect to your Powerline network after they are plugged into a wall power outlet. For any additional adapters, you will need to reconfigure any additional Powerline adapters that you add to use the encryption key of your existing Powerline network.
© Copyright 2012 TRENDnet. All Rights Reserved.
8
