TRENDnet TEW-637AP, TRENDNET manual Give the file a name, then click Save

Note:

1.To protect your network from any unauthorized access it is recommended to enable wireless encryption.

2.The example below is for WPA-PSK/WPA2-PSK (AES) security. If you select WPA-PSK or WPA2-PSK, make sure your wireless adapters support WPA or WPA2. If your wireless adapters do not support WPA or WPA2, then select WEP.

3.WEP encryption only supports 802.11b/g speed of up to 54Mbps.

4.Once encryption is enabled on the router, each wireless computer and device must be configured with the same encryption key.

14.Select the desired WPA mode, enter characters for your Pre-Shared key and then click Next. For WPA-PSK or WPA2-PSK, the Pre-Shared Key must be between 8 and 63 ASCII or 64 HEX characters. Make sure to copy down the Pre-Shared Key. You will need the Pre-Shared Key when you configure your wireless adapter(s).

15. Click Save (optional). This saves your configuration settings in a file, which can be roloaded when needed.

16.Give the file a name, then click Save.

5