Troubleshooting
1.All the settings are correct, but I can not make a wireless connection to the Access Point.
1.Double check that the wireless LED on the Access Point is lit.
2.Power cycle the Access Point. Unplug the power to the Access Point. Wait 15 seconds, then plug the power back in.
3.Contact the manufacturer of your wireless network adapter. Make sure the wireless network adapter is configured with the proper SSID. The default SSID of the Access Point is TRENDnet637. If you have enabled any encryption on the Access Point, make sure to configure the wireless network adapter with the same
2.I have a wireless adapter that supports WiFi Protected Setup (WPS) push button setup. How do I setup WPS between the
1.Press on the WPS button on the front of the
2.Refer to your wireless adapters for instructions on setting up WPS.
3.I inserted the Utility
1.For Windows 7, if the installation menu does not appear automatically, click on the Windows Icon on the bottom left hand corner of the screen, click the “Search programs and files” box, and type D:\autorun.exe, where “D” in “D:\autorun.exe” is the letter assigned to your
2.For Windows Vista, if the installation menu does not appear automatically, click on the Windows Icon on the bottom left hand corner of the screen, click on the “Start Searc”h box, and type D:\autorun.exe, where “D” in “D:\autorun.exe” is the letter assigned to your
3.For Windows XP/2000 if the window does not appear automatically, click Start, click Run and type D:\autorun.exe where “D” in “D:\autorun.exe” is the letter assigned to your
4.I do not have a DHCP server or DHCP is disabled on my network and I am unable to configure the
1.Go to the TCP/IP settings on your computer and assign a static IP address on your computer's network adapter in the subnet of 192.168.10.x. Since the default IP address of the
2.Open Internet Explorer and enter http://192.168.10.100 into the address bar.
7
