TRENDnet TV-IP212W manual Verify the Power and Link LEDs are on, Register Your Product, English

7.Disconnect the RJ-45 cable (TV-IP212W/TV-IP312W).

8.Verify the Power and Link LEDs are on.

Note: The TV-IP212W/TV-IP312W will not work wirelessly until you disconnect the Ethernet cable from the back of the camera.

9.Click Live View. Then click MJPEG compression if you are using Firefox or Safari browser.

Your installation is now complete.

Note: For detailed information regarding the TV-IP212/TV-IP212W/TV- IP312/TV-IP312W configuration and advanced settings, please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or TRENDnet's website at http://www.trendnet.com.

Register Your Product

To ensure the highest level of customer service and support, please take a moment to

register your product Online at: www.trendnet.com/register

Thank you for choosing TRENDnet

6

English