Installation
When performing a check of the CD operation prior to installation, place this unit in a horizontal position and perform a loading/eject of the CD.
Installation
Install onto the car bracket using the supplied screws (M5 × 6 mm, M5 × 7 mm). The holes of the car bracket to use will differ depending on the car model.
When a ground wire is included in the wiring kit (which is sold separately), fasten the ground wire with the binding screw located on the rear panel of this unit.
Screw (M4× 8) 
(commercially available)
Accessory3
(M5 × 6 mm) or Accessory4
(M5 × 7 mm) Accessory2
(Only for NISSAN car)
•During installation, do not use any screws except for those provided. The use of different screws might result in damage to the main unit.
•Damage may occur if a screwdriver or similar tool is used with excessive force during the installations.
USB Device Connection
1Remove the cap and connect the USB cable (Accessory5).
2Connect the USB device to the unit using the supplied cable.
36 English
