•You can use the Dual Zone System with the internal auxiliary input.
5Exit Audio Setup mode
Press the [VOL] knob for at least 1 second.
Speaker Setting
1Enter Standby
Press the [SRC] button. Select the "STANDBY" display.
2Enter Speaker Setting mode Press the [VOL] knob.
3Select the Speaker type Turn the [VOL] knob.
Each time you turn the knob, the setting alternates between the settings shown in the table below.
Speaker type | Display | |
OFF |
| "SP OFF" |
For 5 | & 4 in. speaker | "SP 5/4" |
For 6 | & 6x9 in. speaker | "SP 6*9/6" |
For the OEM speaker | "SP OEM" | |
4Exit Speaker Setting mode Press the [VOL] knob.
Subwoofer Output
Turning the Subwoofer output ON or OFF.
Push the Control knob toward [AM] for at least 2 seconds.
Each time you push the knob, Subwoofer output switches ON and OFF.
When it is ON, "SW ON" is displayed.
•You can control this function when <Switching preout> (page 27) is set to "SWPRE SW".
•You can control this function when "2ZON" of <Audio Setup> (page 12) is set to "OFF".
TEL Mute
The audio system automatically mutes when a call comes in.
When a call comes in
"CALL" is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio system comes back ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio system comes back ON.
•To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to <Connecting Wires to Terminals> (page 35).
English 13
