TRENDnet TV-IP400W, tv-ip400

For Windows 98/ME users:

- On the Desktop, right click on Network Neighborhood g select

Propertiesg right click on the Local Area Connection g select

Properties, the Local Area Connection Properties Window will appear

- Under Configuration tab, select your Network Adapter (TCP/IP protocol)

g click on Properties button, TCP/IP Protocol Properties Window will

appear

1. Select Specify an IP address option and enter the IP, Subnet Mask

addresses.

For detailed information about the TV-IP400/TV-IP400W's configuration and

advanced settings, please refer to the User's Guide on the included CD-ROM

or to www.TRENDnet.com.

Certifications

This equipment has been tested and found to comply with FCC and CE Rules. Operation is

subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received.

Including interference that may cause undesired operation.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV

INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS

EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO

OPERATE THE EQUIPMENT.