TRENDnet User’s Guide

Starting the TRENDnet Cloud Service

Note: (Connect the camera to the Internet and make sure its accessible to the web).

1.Look underneath the camera for a similar URL

(http://11223344.cam.trendnetcloud.com) on the label.

2.Connect the power cable to the camera.

There are two methods to connect to the Internet, wired and wireless. For wireless, follow the instructions from Image A below. For wired, follow the instructions from Image B below.

Image A (connecting using WPS)

TV-IP851WC / TV-IP851WIC

Image B (wired connection)

3.Open your browser, type the URL listed on the label of your camera and hit

Enter to connect to the camera’s live stream. Please note: you can also use this

URL to connect to the camera from any location or computer.

There are three modes when connecting your TV-IP851WC/TV-IP851WIC to the web. This is visible through the “cloud” at the top right side of the web interface.

Blue Mode

The Blue Mode indicates the camera is connecting directly to the internet or local network. This mode offers configuration and management options.

© Copyright 2013 TRENDnet. All Rights Reserved.

5

Page 7
Image 7
TRENDnet TV-IP851WIC manual Starting the TRENDnet Cloud Service, Image a connecting using WPS, Image B wired connection