TRENDnet TV-IP851WIC, TV-IP851WC Product Hardware Features, Rear Panel View, Front Panel View

TRENDnet User’s Guide

Product Hardware Features

Rear Panel View

Rear Air Vents

TV-IP851WC / TV-IP851WIC

Front Panel View

Microphone

Light Sensor

IR LED

Camera Lens

Antenna

WPS button

LAN port

Power port Reset button

Focus Ring

Privacy button

Power/Link LED

∙LAN Port – Connect Ethernet cables to your wired network devices.

∙Power Port – Connect the included power adapter from your camera to an available power outlet.

Note: Use only the adapter that came with your camera.

∙Reset Button – Use an item such as a paperclip to push and hold this button for 3 seconds and release to reset your camera to its factory defaults.

∙WPS (Wi-Fi Protected Setup) – Push and hold this button for 3 seconds to activate WPS. The button LED is blinking green when WPS is activated.

∙Antenna – 2dBi detachable antenna

∙IR LED – Built-in 4 IR LED for night vision uses. (for TV-IP851WIC)

∙Light Sensor – Detects the light source to turn IR on or off.

∙Focus Ring – Turn to adjust the focus of the camera.

∙Microphone – Built-in microphone for audio can be turn on or off.

∙Privacy button – Press the privacy button to redirect the camera’s viewing position to a downward and obscured view. To return the camera to the previous viewing position, wait 5 seconds and then press the privacy button again.

∙Power - This LED indicator is solid blue when your camera is powered on. Otherwise if this LED indicator is off, there is no power to your camera.

∙Link – This LED indicator is blinking orange when there is connection/data to your camera.

© Copyright 2013 TRENDnet. All Rights Reserved.

2