Pacemark 3410 Triad Default Printer Settings (continued)
GROUP | ITEM | SET |
|
|
|
Graphics | ||
| Receive Buffer Size | 28K |
| Paper Out Override | No |
| Print Registration | 0.00 mm |
| Operator Panel Function | Full Operation |
| Reset Inhibit | No |
| Print Suppress Effective | Yes |
| Auto LF | No |
| CSF Bin Select | Bin 1 |
| Time Out Print | Valid |
| Auto Select | No |
| Sensor Disable | No |
|
|
|
Serial I/F | Parity | None |
| Serial Data 7 or 8 Bits | 7 Bits |
| Protocol | Ready/Busy |
| Diagnostic Test | No |
| Busy Line | SSD- |
| Baud Rate | 9600 |
| DSR Signal | Invalid |
| DTR Signal | Ready On Power Up |
| Busy Time | 200 ms |
|
|
|
Printing Current Printer Settings
Use the list of current printer settings to identify menus and to determine which settings you need to change. For example, if you are changing the CPI, change all occurrences of the CPI shown on the printout.
You can also use the Pacemark 3410 Triad Default Printer Settings table on page 5 to identify printer menus, and as a reference to the Triad default printer settings.
To print the current printer settings:
1.Press PRINT QUALITY and CHARACTER PITCH at the same time to enter Menu Mode.
Menu Mode prints on the printer paper.
2.Press PRINT to print the current printer settings.
6 | Printing Current Printer Settings |
