ASSEMBLY AND MOUNTING INSTRUCTION
For 31910/1
Please read the Assembly lnstruction sheet carefully before proceeding.Carefully unpack and identify all parts prior to building the unit. Each part is identified on the drawing for reference.
DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you must return the item for any reason. Please repack the unit using the original carton and inserts.
STEP 1:Unpack all the parts and classify Them according to the illustration shown at the side. Place the parts on a scratch free
surface;
STEP 2: Make sure the power is turned off at the wall sutlet box where the fixture is to be installed. Secure the cross bar to the wall junction box screws;
STEP 3: Use the wire nuts to connect the positive and negative wires. Connect the ground wire to the junction box ground port;
STEP 4: Secure the fixture to the wall outlet box using two ball nut;
STEP 5: Install Candle Cover and fabric shade;
STEP 6: Install the correct bulb (not provided);
Bul b
fabri c shade
BottomCap
Fi xture
Uni versal mounti ng bar
.. |
