Tribest FS-610 manual HOWow toTOassembleASSEMBLE

HOWow toTOassembleASSEMBLE

Assemble the entire juicing unit [Vertical Auger + Juicing Screen + Pulp Wiping Assembly +

Placel tthe screwVerticalintoAugera centerinto ofthestrainercenter. of the Juicing Screen. Then place the Juicing

* Spin and push the juicing screw while inserting into

Screen into the Pulp Wiping Assembly. the strainer.

Turn and push down the Juicing Screen

while inserting it into the Pulp Wiping Assembly.

ScrInsertw (Vertical+ StrainerAuger+ Rotation+ JuicingwiperScreen

+Pulp Wiping Assembly) into the Auger

Make sure the red dots are aligned.

Housing.

Make sure the red dot on the Juicing Screen and the red dot on the Auger Housing are aligned.

Red Dot on Strainer assemble Juicing Screen mark

RedJuicingDotbonwl

Auger Housing

assemble mark

Vertical Auger

JuicingStrainerScreen

Pulp Wiping Assembly

Auger housing +Feeding Chute Assembly] to the Main Body. Locate the small white arrow on

Assemble the entire top set onto the base. As shown above, assemble the bowl onto the the rear side of the Auger Housing Lid and set it to meet the arrow at “Open” position on the base and twist the bowl so that the lid edge in pointing to ‘close’ sign.

rear top of the Main Body.

Turnrow atthe“Close”id towardspositioncloseof themarkMain. Body. Make sure the aligning mark at “Close” position on the Auger Housing lid and the red dot on the Auger Housing are exactly aligned.Turn the Auger Housing clock-wise until the arrow on the Auger Housing Lid aligns to the ar-

3	Connect the Feeding Chute Assembly to		4	Turn the Feeding Chute Assembly clockwise
	Connect the lid and the bowl through
				By turning it the clock-wise, make sure
	the Auger Housing. Align the mark of the			until the mark of the “CLOSE” position aligns
	the red spot	assembles mark and		the spot on the lid and the red spot
	“OPEN” position on the Auger Housing Lid			to the red dot on the Auger Housing.
	assemble it.			on the bowl is aligned.
	to the red dot on the Auger housing.
				Auger
				Housing Lid

Align mark at Assembly position “OPEN” position mark

on the Auger Housing Lid

Auger

Housing

Red Dot on Juicing bowl Auger Housing assemble mark

	Properly place the Juice Container
	Place the juice cup properly.
	and Pulp Container at the base of the
	juice/pulp spouts.

›