INTRODUCTION

WARNING: THIS APPLIANCE MUST BE EARTHED

RATING PLATE

This is situated on the front frame of the appliance and can be seen upon opening the door. Alternatively the rating plate may also be found on the back or top of some models (where applicable).

The appliance must be protected by a suitably rated fuse or circuit breaker. The rating of the appliance is given on the rating plate.

Do not remove the rating plate from the appliance as this may invalidate the guarantee.

INSTALLATION

If your appliance has been damaged in transit, contact your supplier immediately. DO NOT attempt to install it.

Your appliance left the factory fully packaged to protect it from damage. If it is delivered without packaging and damage has occurred, the manufacturer cannot accept responsibility. Contact your supplier for advice.

Once the packaging has been removed the appliance should only be moved by hand. DO NOT use a sack barrow or any other aid to lift the appliance as damage may occur.

Connection to the electricity supply must be carried out by a qualified electrician/competent person.

The electrical connection should be made using a double pole isolating switch (cooker socket) with at least 3mm contact separation in all poles. The cable must have conductors of sufficiently high cross- sectional area to prevent overheating and deterioration.

The recommended cross-section area is six square millimetres (6.00mm2) area.

The cable must be routed away from potentially hot areas marked by X in the diagram below.

REAR VIEW

To move the appliance, open the main oven door, and lift the appliance by holding inside the top of the compartment.

This is a type Y appliance which means it is free- standing and can be fitted with cabinets on one or both sides. It may also be fitted in a corner setting.

Ensure that the appliance is standing level.

Side walls which are above hob level should be protected by heat resistant non-combustible material and MUST NOT be nearer than 40mm to the hob side.

A nominal air gap of 2mm all around the appliance is required to enable the appliance to be moved into position.

Always ensure an air gap is maintained at hotplate level. Tiles or other forms of deep wall covering should not obscure this gap.

Air gap

8

Page 7 Page 9
Page 8
Image 8
Tricity Bendix CSE500 installation instructions Introduction, Rating Plate, Installation
Page 7 Page 9

CSE500 specifications

The Tricity Bendix CSE500 is a contemporary freestanding cooker designed to meet the needs of modern kitchens while ensuring efficiency and convenience in cooking. Known for its stylish aesthetic and robust performance, this electric cooker integrates advanced features that cater to both amateur cooks and culinary enthusiasts.

One of the key features of the CSE500 is its large oven capacity, which allows for cooking multiple dishes simultaneously. The spacious interior is designed to accommodate everything from roasts to cakes, making it perfect for families or those who frequently entertain guests. The oven is equipped with multiple cooking functions, including fan-assisted cooking, conventional heating, and grill options, providing versatility to ensure optimal results for various recipes.

A significant technology that enhances the functionality of the Tricity Bendix CSE500 is its intuitive control panel. The electronic timer and clock features help users manage cooking times with precision. This function is complemented by easy-to-read dials and indicators, making it user-friendly for everyone, including those who may not be technologically inclined.

Energy efficiency remains a priority with the CSE500. Its insulation technology ensures minimal heat loss, promoting energy conservation while delivering effective cooking performance. This not only decreases electricity consumption but also contributes to lower utility bills, making it an economically sensible choice.

Moreover, safety is a cornerstone of the CSE500’s design. The appliance includes features such as a safety cut-off and a cool-touch door to prevent accidents, especially in busy kitchens. The easy-clean enamel interior simplifies maintenance, allowing users to enjoy their cooking experience without the hassle of extensive cleanup.

The Tricity Bendix CSE500 is also known for its stylish exterior, available in a variety of colors that can seamlessly blend into any kitchen decor. Its robust build and modern design make it not just a functional appliance, but a statement piece in the cooking space.

Overall, the Tricity Bendix CSE500 combines modern aesthetics, energy efficiency, and versatile cooking options, making it an ideal choice for those looking to enhance their culinary experience while maintaining style and functionality in the kitchen.
Top Page Image Contents