Tricity Bendix CSIE452 Automatic Control, Setting The Controls For Automatic Use

Models: CSIE452

1 32
Download 32 pages 17.16 Kb
Page 12
Image 12
AUTOMATIC CONTROL

AUTOMATIC CONTROL

The automatic control can be used to control either oven but you can only use the control for both ovens at the same time if the cooking time is the same. When you use the automatic controls for the first time it’s probably best to choose a time when you are at home. That way you can check to make sure you’ve set everything correctly and you’ll feel much more confident when you are away from home in the future.

SETTING THE CONTROLS FOR AUTOMATIC USE

This is very easy. All you have to do is work through the steps below. The clock will work out the rest for itself.

1 Is the electricity supply on?

2 Is the clock

To adjust turn the selector knob

showing the

to ‘Manual’ then to ‘Time

correct time?

Setting’. Turn the setting knob in

 

either direction.

3How long will the food take to cook?

Turn the selector knob to ‘Cook Time’. Then turn the setting knob until the length of time you want the food to cook shows in the display. The maximum cooking time is 10 hours. ‘Auto’ will show in the display.

4What time do you want the food to be cooked by?

Turn the selector knob to ‘End Time’. Turn the setting knob until the time the oven is to switch off shows in the display. The cookpot (SETTING THE CONTROLS FOR AUTOMATIC USE) will go out.

The ‘End Time’ must not be more than 23 hours 59 minutes from the time of day. For example if the time of day is 9.00 am the latest ‘End Time’ will be 8.59 am the next day.

5

Set to

Turn

the selector knob to

 

automatic.

‘Automatic’.

6

Turn on the

Turn

the oven control to the

 

oven control.

required temperature.

The time shown on the right gives an example of setting the automatic controls when the time is 9.00 am, the food is to be cooked for 2½ hours and the food is needed at 6.00 pm (1800 hours).

The clock will work out what time the oven will switch itself on and it will turn the oven off at the end. Once the automatic sequence is finished there will be an alarm to remind you that you need to set the oven for manual operation. To do this turn the selector knob to ‘Manual’. Turn off the oven control.

If you change your mind and want to cancel a programme that you have set simply turn to ‘Time Setting’ and then to ‘Manual’.

12

Page 12
Image 12
Tricity Bendix CSIE452 installation instructions Automatic Control, Setting The Controls For Automatic Use