To reverse the top hinge assembly proceed as follows:
Remove the 2 worktop retaining screws from the back of the appliance.
Slide the worktop towards the rear and lift clear of the appliance.
Remove the 2 upper hinge plate retaining screws.
Remove the hinge plate from the top of the door.
Unscrew the hinge pin from the hinge plate and re- insert on the opposite side of the plate.
Rotate the hinge assembly 180° and insert the hinge assembly into the opposite location.
Refit the 2 hinge plate retaining screws.
Relocate the worktop and refit the worktop retaining screws.
To reverse the handle proceed as follows:
Remove screw covers (if fitted) and handle retaining screws. Remove blanking plugs on the opposite side.
Relocate the handle to the opposite side and refit retaining screws (covers if fitted), and replace the blanking plugs.
14
