CLEANING
Replace the jug on the base. Pour about 500ml of warm soapy water into the jug. Replace the lid. Do not insert the stirrer.
Turn and the Selector knob to ‘0’ . Press the knob to set the blender into pulse mode for a few seconds to loosen any food particles and free them from the blade. Remove the jug, from the motor unit, pour away the water and rinse in fresh running water.
Unscrew the jar base from the jug.
Take the blade assembly out and disassemble it. Avoid touching the blade edges.
Detach the stopper from the jar cover. Rinse the jar, blade, jar base, jar cover, stirrer and stopper under running water.Wash the lid and stopper separately in warm soapy water, rinse and allow to dry.
DO NOT wash the jug or attachments in a dishwasher.
Cleaning the motor base:
Ensure the liquidiser is unplugged from the mains.
Wipe the outer surface of the motor unit with a damp cloth. Never use abrasive cleaners or scouring creams.
Never immerse the motor base in water when cleaning.
After cleaning:
After all the components have been washed and dried,
Locate the blade on the three lugs in the base, place the rubber seal oaer the blade as shown and attach the base to the jug.
STORAGE
After all the components have been washed and dried,
The cable may be wound inside the cavity under the appliance for easier stowage.
7
