The Control Panel

A U T O W A S H

1 1 0 0

on/off

1

2 3

1 Detergent dispenser drawer

2 Mains-on light

This light comes on when the “on/off” button is pressed, and goes out when it is pressed again.

3 “On/Off” button

Press this button to switch the machine on. Press it again to switch the machine off.

Programme Option buttons

Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before pressing the “start/pause” button.

When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out.

If an incorrect option is selected, the corresponding pilot light flashes for a few seconds.

4 “spin” button

Press this button to reduce the maximum speed of the final speed proposed by the machine for the selected programme or to select position “rinse hold” .

The light corresponding to the selected option illuminates.

The following speeds are available for the different fabrics:

Cottons, linen: 500/700/900 max 1100 r.p.m.

Synthetics and wool/(handwash) : 500/700 max 900 r.p.m.

Delicates and mini 30: 500 max 700 r.p.m.

1100

 

 

 

prewash

 

PROGRAMME

 

900

 

 

 

wash

 

mini 30

off

95°

 

700

 

 

 

rinse

 

spin

 

E95°

cottons

 

 

 

 

 

E60°

500

 

 

 

rinse hold

drain

 

 

 

 

softener

 

 

 

E40°

rinse

 

 

 

drain

 

 

 

hold

 

 

 

rinses

 

 

 

40°

extra

easy

start/

spin

 

 

 

 

 

 

 

spin

quick prewash rinse

iron

pause

filter

soak 30

 

 

 

30°

 

 

 

 

 

 

 

 

 

 

 

 

 

end

 

 

 

 

 

 

 

 

 

 

wool 30°

 

 

 

60°

 

 

 

 

 

40°

 

E60°

 

 

 

 

 

delicates

30° 40°

 

30° 40°

synthetics

TBWM 1110

4 5 6 7 8

9 10

11

Rinse Hold

When rinse hold option is selected, the last rinse water is not emptied out, to prevent the fabrics from creasing. When the programme has finished, the door is locked, the light of the “start/pause” button goes off, the pilot lights “end” and “rinse hold” in the programme progress display are alight to indicate that the water must be emptied out.

There are two methods of draining the water from the machine.

Method 1: Drain the water only, no spin:

Turn selector dial to "off" position.

Select the programme “drain”.

The water will be emptied out without spinning. Method 2: Drain and then spin the laundry:

Turn selector dial to “off” position.

Select programme Spin”.

Select the required spin speed (see 4 spin speed button)

Press Start/Pause button

The water will empty out and then the laundry will be spun at the selected spin speed.

Attention! Before selecting programmes “Drain” or “Spin”, the selector dial has to be positioned on “off” (cancelling).

5 “quick” button

This option can be used for lightly soiled cottons, synthetic or delicate items that have been used or worn for a short time.

This option is not available with the wool/(handwash) programme , the Energy saving programmes (E95°, E60° and E40°) and Mini 30.

6

Page 6
Image 6
Tricity Bendix TBWM 1110 Control Panel, Detergent dispenser drawer Mains-on light, On/Off button, Spin button