Page 9
SPECIAL NOTES ON LCD MONITORS
The following are normal with LCD Monitors and do not indicate a problem.
• When the LCD Monitor is first powered on, the picture may not fit in the display area. This is because of the
type of computer graphics system that is used. In such case, adjust the picture position to a desired image
(See Operating the Monitor).
• The screen may flicker during initial use. Turn off the power and then turn it on again the flickering should
disappear.
• Users may notice some uneven brightness on the screen depending on the desktop resolution they use. It is
normal for LCD Monitors to show uneven brightness.
• Due to the nature of the LCD displays, images displayed on the screen for long periods of time may still
appear after the screen content has been changed. This phenomenon can be corrected, over time, by
switching display content or leaving the monitor off for a number of hours.
• If the screen becomes dark, flickers, or does not light-up, contact your dealer or the nearest service center for
a backlight replacement. Do not attempt to replace it yourself.
CLEANING
WARNING
If you dropped any material or liquid such as water onto the monitor when cleaning, unplug the power cable
immediately and contact your dealer or the nearest service center. Always make sure your hands are dry
when unplugging the power cable.
CAUTION
• For safety reasons, turn-off the power switch and unplug the monitor before cleaning.
• Do not scratch or rub the screen with a hard object.
• Never use any of the following solvents on the LCD Monitor. Such harsh chemicals may cause
damage to the cabinet and the sensor:
Thinner Spray-type cleaner, Benzene, Wax, Abrasive cleaner, Acid or Alkaline solvent
CABINET
• Remove dirt with a lightly moistened cloth and a mild solvent detergent. Then wipe the cabinet with a soft dry
cloth.
DISPLAY AREA (SENSOR)
• Periodic cleaning with a soft dry cloth is recommended. Non-abrasive household window-type cleaners are
recommended.
• Do not use tissue to clean the display area. It may scratch or dull the LCD screen.