Trion High Efficiency Console Electronic Air Purifier Washing the Electronic Filter, Washing Tips

Washing the Electronic Filter

The Electronic Filter is designed such that it can be cleaned using common household detergent.

Using dishwashing detergent and hot water, make a good soaking solution in a tub or large basin. Completely immerse the Electronic Filter and soak for 20 to 30 minutes in the soaking solution (Figure 5).

After the Electronic Filter has soaked sufficiently, agitate the cell up and down in the soaking solution until clean. If the Electronic Filter is extremely dirty, spray it with a common household cleaner or Electronic Air Cleaner solution. Allow the filter to soak for five additional minutes before proceeding with the rinse instructions.

Thoroughly rinse both sides of the Electronic Filter. If a sprayer is available, spray with water (Figure 6). Check to make sure each plate in the Electronic Filter is clean. Shake as much water out of the Electronic Filter as possible. Allow the filter to air dry a minimum of one hour before returning to service.

Washing Tips

When handling the Electronic Filter, be careful not to damage or distort wires or metal plates as this will cause exces- sive snapping or arcing during opera- tion.

Note: Slight discoloration of cell plates is normal after use and does not affect the performance of the Electronic Air Purifier.

Figure 5

Figure 6

Warning: Do not clean the Electronic Filter in dishwasher.

5