Tripp Lite 230V Safety, Line Conditioner Location Warnings, Line Conditioner Connection Warnings

Safety

This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all Line Conditioners.

Line Conditioner Location Warnings

•Install your Line Conditioner indoors, away from excess moisture or heat, dust or direct sunlight.

•For best performance, keep the indoor temperature between 0° C and 40° C (between 32° F and 104° F).

•Leave adequate space around all sides of the Line Conditioner for proper ventilation.

Line Conditioner Connection Warnings

•Connect your Line Conditioner to a three-wire, grounded AC power outlet. Do not remove or modify the ground pin of the Line Conditioner's plug.

•Do not use two-prong adapters with the Line Conditioner's plug. Do not plug your Line Conditioner into itself; this will damage the Line Conditioner and void your warranty.

•If you are connecting your Line Conditioner to a motor-powered AC generator, the generator must provide clean, filtered computer-grade output.

•Use care when connecting country-specific plugs to selected 220/240V, 50/60 Hz Line Conditioners. Hot 1 and Hot 2 may be reversed. When using a French CEE7/7 plug, always use the separate grounding pin supplied with the unit. When using a Schuko CEE7/4 plug, an ungrounded condition will exist unless separate grounding to the rear of the Line Conditioner is provided by the user.

Equipment Connection Warning

•Do not use Line Conditioners for life support applications in which a malfunction or failure of a Line Conditioner could cause failure or significantly alter the performance of a life-support device.

Line Conditioner Maintenance Warning

•Line Conditioners require no maintenance. Keep the Line Conditioner dry at all times. DO NOT open the unit for any reason.

2