Dixon ZTR 5425 manual Parking Brake Cable Adjustment, Care And Maintenance, Brake Lever Off, Page

CARE AND MAINTENANCE

PARKING BRAKE CABLE ADJUSTMENT:

Make necessary adjustments to the T-Box to Hydrostat belt, as shown on page 32.

Position parking brake lever in the off or disengaged position.

This will allow the belt idler used on the engine to T-box to swing fully and apply tension to the belt.

At this time, check that the cable has approximately 1-1/2 to 2 inches of free play.

If adjustment is required, turn the lock nut illustrated below to achieve a recommended 1-1/2 to 2 inches of free play.

ADJUST HERE FOR PROPER

FREE PLAY OF CABLE WITH

BRAKE LEVER OFF

NOTE: Cable must have the recommended 1-1/2 to 2 inches of free play with parking brake released or drive belt may slip, causing loss of power.

Page 35