Warranty | today |
| .com/warranty | |||
Registration: | for | Lite | ||||
|
| Tripp | Owner’s Manual | |||
|
| FREE |
| |||
online |
|
| ||||
|
|
|
|
| ||
register | win.tripplite |
|
| |||
www |
|
|
|
|
| |
to |
|
|
|
|
|
|
chance — |
|
|
|
|
|
|
product |
|
|
|
|
|
|
with Audio
Model:
Introduction
The
Installation
The KVM Switch is a
Note: Before connecting the KVM Switch to the computers, make sure all connected computers are
Step 1. Make sure all computers that are to be connected to the KVM Switch and their peripherals are
in a
Step 2. Connect the shared PS/2 keyboard, mouse, monitor, speaker set and microphone to the KVM Switch.
Step 3. Connect each of your computers to the KVM Switch using the included KVM and audio/ microphone cables.
Step 4.
Push Button Switching
The
(See Quick Reference Guide.)
Keyboard Hot Key Switching
A keyboard hot key sequence consists of at least three specifi c keystrokes. (See Quick Reference Guide.)
Hot key sequence: [ScrLk]* + [ScrLk]* + command key(s)
*
Hot Key Sequence Configuration
For users who want to use a sequence other than the two consecutive Scroll Locks, the
Step 1. Hit Scroll Lock + H (two beeps will signal readiness for new sequence selection). Or press and hold down the last push button (Port Selection Button) until you hear two beeps and then release the button.
Step 2. Select and press the key you would like to use as your sequence (Scroll Lock, Caps, Esc, F12 or Num Lock keys are available for selection) and you’ll hear a beep for selection confi rmation. Now you can use the new sequence to execute your hot key commands.
Each keystroke within a hot key sequence should be pressed within 2 seconds. Otherwise, the hot key sequence will not be valid.
For detailed hot key sequences and their corresponding functional commands, please refer to the Quick Reference Guide on the other side of this manual.
12
Console
1111 W. 35th Street, Chicago, IL 60609 USA
(773)