Manuals / Tripp Lite / Computer Equipment / Switch

Tripp Lite B020-008 warranty Firmware Upgrade Utility, Before You Begin

Models: B020-008

1 29

Download 29 pages 55.55 Kb

Page 21

Firmware Upgrade Utility

Before You Begin

To prepare for the firmware upgrade, do the following:

1.From a computer that is not part of your KVM installation go to our Internet support site and choose the model name that relates to your device to get a list of available Firmware Upgrade Packages.

2.Choose the Firmware Upgrade Package you want to install (usually the most recent), and download it to your computer.

3.Use the Firmware Upgrade Cable (provided with this unit), to connect a COM port on your computer to the Firmware Upgrade Port of your switch.

Note: On a daisy chained installation, the chained stations will automatically receive the upgrade via the daisy chain cables.

4.Shut down all of the computers - but not the Stations - on your KVM installation.

5.From your KVM switch console, bring up the OSD (see p. 15-20) and select the F4ADM function.

6.Scroll down to FIRMWARE UPGRADE. Press [Enter], then press [Y] to invoke Firmware Upgrade Mode (see p. 22.) For your reference, the current firmware upgrade version displays on the screen.

21

Image 21

Tripp Lite B020-008 Firmware Upgrade Utility, Before You Begin, To prepare for the firmware upgrade, do the following

Contents

This package should consist Table of Contents Overview Features IncludeComputer System RequirementsConsole for B022-016 only CablesIntroduction Front View of Console KVM SwitchFront View of B022-016 Port LEDsStation ID LED Rear View for B022-016 Single-Station Installations InstallationMultiple Station Daisy-Chained Installation To set up a daisy-chained installationLCD OSD allows you to set up and configure the LCD display LCD OSD On-Screen Display ConfigurationBasic Operation Manual Port SwitchingOpening the Console KVM Closing the Console KVMPowering Off and Restarting Hot PluggingPort ID Numbering Invoking the Hotkey Mode Port Control Using HotkeysHotkeys Selecting the Active PortSetting the Scan Interval Pausing in Auto ScanStarting Auto Scan Hotkey Beeper Control Skip ModeHotkey Summary Table Port ID EnterOSD On-Screen Display Operation OSD OverviewOSD Navigation OSD Functions OSD Main Screen HeadingsHeading Explanation F1 Go To GotoOSD Hotkey F3 Set Environment SETPassword F4 Administrator ADMF5 Skip SKP F6 Broadcast Mode BRCF8 Log Out Lout F7 Scan ScanFirmware Upgrade Utility To prepare for the firmware upgrade, do the followingBefore You Begin To upgrade your firmware Starting the UpgradeUpgrade Succeeded Upgrade FailedFirmware Upgrade Recovery Setting Default OSD Factory Default SettingsAppendix a Computer Connection TableSpecifications TroubleshootingSymptom Possible Cause Action Function B020-008 B020-016 B022-016Clear Log-in Information Appendix BAppendix D Appendix CAppendix E Optional Rack MountingFCC Radio/TV Interference Notice Addendum