Tripp Lite B020-016-17-IP 1. FCC Information 2. User Notice, 3. Package Contents, 4. Introduction

1. FCC Information2. User Notice3. Package Contents

This is an FCC Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take

adequate measures.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will

be required to correct the interference at his own expense.

All information, documentation, and speciﬁcations contained in this manual are subject to change without prior notiﬁcation by the manufacturer. The

manufacturer makes no representations or warranties, either expressed or implied, with respect to the contents hereof and speciﬁcally disclaims any

warranties as to merchantability or ﬁtness for any particular purpose. Any of the manufacturer’s software described in this manual is sold or licensed “as

is.” Should the programs prove defective following their purchase, the buyer (and not the manufacturer, its distributor, or its dealer), assumes the entire

cost of all necessary servicing, repair and any incidental or consequential damages resulting from any defect in the software.

The manufacturer of this system is not responsible for any radio and/or TV interference caused by unauthorized modiﬁcations to this device. It is the

responsibility of the user to correct such interference.

The manufacturer is not responsible for any damage incurred in the operation of this system if the correct operational voltage setting was not selected prior

to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS CORRECT BEFORE USE.

This package consists of:

• (1)B020-008-17-IPorB020-016-17-IPConsoleKVMSwitchwithIPAccess

• (2)P774-006PS/2KVMCableSets

• (1)PowerCord

• (1)CDwithOwner’sManual*

Check to make sure that all of the components are present and in good order. If anything is missing, or was damaged in shipping, contact your dealer.

Read this manual thoroughly and follow the installation and operation procedures carefully to prevent any damage to the switch or to any other devices on

the installation.

4.1 Overview

4. Introduction

TheNetDirectorConsoleKVMSwitchwithIPAccessisacontrolunit

thatallowssecureaccesstomultiplecomputersfromasingleKVM

(keyboard,video,andmouse)console.ItconsistsofanintegratedLCD

monitor,keyboard,andtouchpadina1Urack-mountablehousing.The

NetDirectorConsoleKVMSwitchwithIPAccessfeaturesdual-rail

technology. To maximize space in your data center, the keyboard/touchpad

module slides back to “hide away” when not in use, while the thin proﬁle

LCDmonitorrotatesback–ushagainsttherack–allowingconvenient

monitoring of computer activity.

TheNetDirectorConsoleKVMSwitchwithIPAccessfeaturesIP-based

connectivity that allows multiple remote operators to concurrently monitor

the computers on your installation. It uses TCP/IP for its communications

protocol, allowing it to be accessed from any computer on the LAN, WAN,

orInternet–whetherthatcomputerislocateddownthehall,downthe

street, or halfway around the world.

Remote

Optional External Console